Gas air heaters

Gas air heaters type ATG” of “PAKOLE” production (Hungary). ATG thermogenerators are floor-type appliances equipped with block burners. Exhaust gas can be removed by insulated chimneys. They are basically composed of a heat exchanger connected to a boiler and a fan unit, and are available with wide rage of capacities to suit various applications. Thermogenerators are mainly installed indoor, however, they can be placed outdoor if the necessary safety measures are taken. Fresh air can be supplied either directly using multidirectional air supply plenum or through an air duct system connected to the appliance. No supervision is required. The control of these automatic systems is provided by thermostats or temperature switches installed in the space to be heated.

Available dimensions of gas air heaters type “ATG”:

Main features:

• AISI 430 rust-proof boiler drum, exhaust connection is on the side opposite to the burner
• heat exchanger from aluminized steel plate, excellent heat transfer (efficiency above 92.7%), easy to clean and maintain
• internal frame is from strong steel plate or welded pipe structure (depending on the design)
• air heater body has double sheet cover, the inner one is electroplated, the outer one is powder coated in white RAL 9002, with heat insulation between them
• air circulation by 1, 2 or 3 fans, air can be supplied from both sides
• fans are single-stage in case of versions 30 and 40, and three-stage for versions 60 and above
• fan units with higher static pressure are optional
• can be operated with oil- or gas-burner, with two-point or 3-point control, and in the case of gas-burners with modulation control as well
• double or limiting thermostat for safe operation
• optional accessories are offered for both the suction and exhaust sides

For further information or consultation please do not hesitate to contact us.
Detailed instructions on “ATG”

Gas air heaters type “GTV” of “PAKOLE” production (Hungary). GTV air heaters are suitable for the heating of various types of spaces by being mounted on sidewalls, columns or the ceiling. The appliances equipped with axial or centrifugal fans either circulate the indoor air or suck in fresh air from outside. The appliances can be connected to an air duct both with the air supply and the exhaust side. The patented group burner design guarantees excellent combustion. The heat- and corrosion-resistant spatially bent heat exchangers of steel pipes ensure excellent heat transmission, their efficiency exceeds 91-92%. Operation in closed mode can be carried out through the connection of various exhaustion and combustion air intake elements and sets. The options for mounting include bottom or top mounting, fixing on console with 4-point bolt connection, or suspension chains. Patented group burner design. Heat- and corrosion-resistant steel pipe heat exchangers. Compact gas magnetic valve, ignition and flame monitoring. Adjustable shutters. Temperature control in summer and winter mode. Grouped regulation with pilot control. Thereby the heaters “GTV” have been proved to be highly efficient, heating equipment.

Versions of gas air heaters type “GTV”:

For further information or consultation please do not hesitate to contact us.
Detailed instructions on «GTV»

Gas air heater type “LH” of “PAKOLE” production (Hungary). The LH air heaters with group burners are suitable for the heating of any kind of spaces where ventilation is highly above the average due to the activity carried out or technology applied. Accordingly, the fresh air supply required for the appliance has to be rated in compliance with the regulations. These systems are generally used in livestock farms, greenhouses or construction areas. They are highly resistant to dust, moisture and ammonia. Electrical protection rating is IP 54. Can be mounted on the sidewall or suspended from the ceiling. Control can be carried out in heating, ventilation or mixed modes, individually or centrally.

Versions of gas air heaters type «LH»:

Advantages:

• Anticorrosion stainless steel frame
• Burners with the contour band ignition
• Three modes of operation: heating, ventilation or combined
• Valve disk, which improves heat transfer
• Triple security system (flame control with ionization sensor, air flow sensor, overheating sensor)
• Easy installation by suspension, can be mounted horizontally or in a tilted way
• Quick heating of areas

For further information or consultation please do not hesitate to contact us.
Detailed instructions on «LH»